STEP 1: Prop Guard Removal

Using the thumb and index finger, pinch the base of the prop guard closest to where it clamps onto the motor, as pictured below. While pinching, simultaneously twist and pull firmly to remove the guard. Repeat this process for each of the FOUR [4] propeller guards.

STEP 2: Propeller Removal

Use the prop tool included with your Mambo to remove the propellers. Slide the "forks" of the tool under the prop and pry it off.

Hold the center of the Propeller using the thumb and index fingers. With the other hand hold the Central Body at the Motor. Firmly yet gently pull the Propeller away from the Motor and Central Body. It may help to use a side-by-side motion while pulling the Propeller from the Motor.